vflange

These "V" Flange and BT shanks are a complement to the standard shanks and adapters.

When using our Boring Heads or the CRI-BORE system on a C.N.C. machine that has a Spindle Orientation feature - the shanks on this page must be factory fitted to assure proper orientation of the boring system to the cutting tool.

7/8-20 THREAD	CODE NO.	TAPER	DESCRIPTION	A	B
For use with the following HEADS, CRI-TWIN and CRI-BORE BORING SYSTEMS TMT-1500 * TMT-2375 * S-1-1/2 * S-2 DBL-202 * SL-202 * CB1.5 * CB2 CT-180 * CT-12580 * CT-1580 * CT-280	20143	NO. 40	CB1.5-CV40	7/8-20	1-3/4
	20144	NO. 45	CB1.5-CV45	7/8-20	1-3/4
	20151	NO. 50	CB1.5-CV50	7/8-20	1-3/4
	20145	NO. 40	CB2-CV40	7/8-20	1-7/8
	20146	NO. 45	CB2-CV45	7/8-20	1-7/8
	20147	NO. 50	CB2-CV50	7/8-20	1-7/8

1-1/2-18 THREAD	CODE NO.	TAPER	DESCRIPTION	A	B
For use with the following HEADS, CRI-TWIN and CRI-BORE BORING SYSTEMS S-3 * DBL-203 * DBL-204 SL-203 * SL-204 * 3F-HB * TABH-250 TABH-300 * CB3 * CT-380	20148	NO. 40	CB3-CV40	1-1/2-18	1-7/8
	20149	NO. 45	CB3-CV45	1-1/2-18	1-7/8
	20150	NO. 50	CB3-CV50	1-1/2-18	1-7/8

7/8-20 THREAD	CODE NO.	TAPER	DESCRIPTION	A	B
For use with the following HEADS, CRI-TWIN and CRI-BORE BORING SYSTEMS TMT-1500 * TMT-2375 * S-1-1/2 * S-2 DBL-202 * SL-202 * CB1.5 * CB2 CT-180 * CT-12580 * CT-1580 * CT-280	20165	NO. 35	CB1.5-BT35	7/8-20	1-3/4
	20166	NO. 40	CB1.5-BT40	7/8-20	1-3/4
	20167	NO. 45	CB1.5-BT45	7/8-20	1-3/4
	20168	NO. 50	CB1.5-BT50	7/8-20	1-3/4
	20158	NO. 35	CB2-BT35	7/8-20	1-1/8
	20152	NO. 40	CB2-BT40	7/8-20	1-9/16
	20159	NO. 45	CB2-BT45	7/8-20	1-9/16
	20160	NO. 50	CB2-BT50	7/8-20	1-9/16

1-1/2-18 THREAD	CODE NO.	TAPER	DESCRIPTION	A	B
For use with the following HEADS, CRI-TWIN and CRI-BORE BORING SYSTEMS S-3 * DBL-203 * DBL-204 SL-203 * SL-204 * 3F-HB * TABH-250 TABH-300 * CB3 * CT-380	20162	NO. 35	CB3-BT35	1-1/2-18	1-9/16
	20153	NO. 40	CB3-BT40	1-1/2-18	2-1/16
	20163	NO. 45	CB3-BT45	1-1/2-18	2-1/16
	20164	NO. 50	CB3-BT50	1-1/2-18	2-1/16