For machining bosses or seating
surfaces - or for boring operations where the entire head can enter a hole - Criterion
offers this SL series holder. These slotted holders are interchangeable with our standard
bar holders and can be fitted to the CB-202, 203 and 204 series bodies. Shanks and
adapters for these heads are in the Shanks and Adapters section. The CSL-202 has a 7/8-20
threaded back while both the CSL-203 and the CSL-204 have a 1-1/2-18 threaded back.
This set-up provides the maximum amount of bearing surface between the body and the shank when using "V" flange or BT shanks.
| CODE NO. |
TOOL NO. |
"A" ACTUAL SIZE |
"B" OVERALL LENGTH |
"C" SLOT SIZE |
OFFSET | "D" THREAD | |
|---|---|---|---|---|---|---|---|
| 29200 | CSL-202 | 2" DIA. | 2-13/32" | 3/8" | 5/8" | 7/8"-20 | |
| 29900 | CSL-203 | 3" DIA. | 2-7/8" | 1/2" | 1" | 1-1/2"-18 | |
| 26949 | CSL-204 | 4" DIA. | 3-3/8" | 3/4" | 1-5/8" | 1-1/2"-18 | |
|
|
| ||||||
