FOR BORING HEADS * CRI-BORE * CRI-TWINS
| 2 Morse Taper with 3/8-16 Draw Bar | 7/8-20 THREAD For use with ANY of the following: S-1-1/2 S-2 DBL-202 SL-202 CB 1.5 CB2 TMT-1500 TMT-2375 CRI-TWIN: in all sizes except 380 |
| 2 Morse Taper - tang type | |
| 3 Morse Taper - tang type | |
| 4 Morse Taper - tang type | |
| 30 National Taper with Drive Flange* | |
| 40 National Taper with Drive Flange* | |
| Bridgeport R-8 | |
| 1/2" Diameter Straight Shank | |
| 5/8" Diameter Straight Shank | |
| 3/4" Diameter Straight Shank | |
| 7/8" Diameter Straight Shank | |
| 1" Diameter Straight Shank | |
| Moore Jig Borer Adapter |
*These Shanks will fit Erickson Quick-Change Holders
| 3 Morse Taper - tang type | 1-1/2-18
THREAD |
| 4 Morse Taper - tang type | |
| 5 Morse Taper - tang type | |
| 30 National Taper with Drive Flange* | |
| 40 National Taper | |
| 40 National Taper with Drive Flange* | |
| 50 National Taper | |
| 50 National Taper with Drive Flange* | |
| Bridgeport R-8 | |
| 1" Diameter Straight Shank | |
| 1-1/4" Diameter Straight Shank | |
| 1-1/2" Diameter Straight Shank | |
| 2" Diameter Straight Shank | |
| No. 9 Brown & Sharpe with 1/2-13 Draw Bar |
*These Shanks will fit Erickson Quick-Change Holders
FOR USE WITH DBL-206
| No. 5 Morse Taper - tang type | 2-1/4-10 THREAD |
| No. 6 Morse Taper - tang type | |
| No. 50 National Taper with Drive Flange | |
| No. 50 "V" Flange | |
| No. 50 "BT" Flange |