For Boring Heads
The boring tools in the sets on this page are intended primarily for use with Criterion Boring Heads. Each tool has a milled set screw flat to permit the cutting edge to be placed on exact centerline when the tool is secured in the head. This assures proper tool cutting geometry and also permits greater accuracy in lateral tool advancement.
1/2" or 3/8" SHANKS |
|
| SET NO. 7S-B6 With 1/2" Shank Consisting of one each |
SET NO. 7A-B6 With 1/2" Shank Consisting of one each |
|---|---|
| SBT-125B | ABT-125B |
| SBT-187B | ABT-187B |
| SBT-250B | ABT-250B |
| SBT-312B | ABT-312B |
| SBT-375B | ABT-375B |
| SBT-500B | ABT-500B |
| Above set available with 3/8" shank -- 7S-A6 |
Above set available with 3/8" shank -- 7A-A6 |
| Above sets are available
with square shanks -- 7S-B6S or 7S-A6S |
Above sets are available
with square shanks -- 7A-B6S or 7A-A6S |
| 1" OR 3/4" SHANKS | |
| SET NO. 7S-E5 With 1" Shank Consisting of one each |
SET NO. 7A-E5 With 1" Shank Consisting of one each |
|---|---|
| SBT-500E | ABT-500E |
| SBT-625E | ABT-625E |
| SBT-750E | ABT-750E |
| SBT-1000E | ABT-1000E |
| SBT-1250E | ABT-1250E |
| Above set available with 3/4" shank -- 7S-D5 |
Above set available with 3/4" shank -- 7A-D5 |
| 1/2" AND 1" OR 3/8" AND 3/4" SHANKS | |
| SET NO. 8-B6 With 1/2" Shank Consisting of one each |
SET NO. 8-E5 With 1" Shank Consisting of one each |
|---|---|
| HSS-125B | HSS-500E |
| HSS-187B | HSS-625E |
| HSS-250B | HSS-750E |
| HSS-312B | HSS-1000E |
| HSS-375B | HSS-1250E |
| HSS-500B | -- |
| Above set available with 3/8" shank -- 8-A6 |
Above set
available with 3/4" shank -- 8-D5 |
| Above sets are available with square shanks -- 8-B6S or 8-A6S |
All boring tool sets come with blocks that permit easy tool selection. For complete specifications on the tools listed here, please refer to the Carbide Brazed & H.S.S. Boring Tools section.