Metric Boring Tools and Bars

metricb.gif (2116 bytes)

 

TA/TAS-Indexable Insert Boring Bars and SBT Brazed Carbide Boring Tools
The "TA/TAS" and "SBT" boring bars and tools were designed to be used in the Criterion boring head, but may also be used in engine lathes, turret lathes and automatics. They are equally adaptable in machines where the tool or the work piece turns.

These tools feature a ground shank diameter (10, 12, 20 & 25 mm) with four flats for a secure 3-point clamping in a round hole or 2-point clamping in a turret post or similar holder.

SBT-Brazed Carbide Boring Tools
Our "SBT" tools are manufactured from carbon steel and P25 grade carbide, to exact standards for the best possible performance. The generous head size dissipates the heat generated at the point of cut, thereby increasing the life of the tool.

When resharpening these tools, stock must be taken off on the ends and sides only - never off the top face. Removing stock off the top face places the cutting edge below centerline and will adversely affect tool performance. As noted above, these tools have a ground shank with four flats.

 

SBT BRAZED CARBIDE BORING TOOLS

CODE NO.

 TOOL NO. ØA ØB C D E
80700 SBT-3MA 10 3 12 48 8
80701 SBT-4MA 4 20 55
80702 SBT-6MA 6 28 62
80703 SBT-8MA 8 37 71
80704 SBT-10MA 10 48 81
80705 SBT-12MA 12 55 90
80706 SBT-3MB 12 3 12 48 10
80707 SBT-4MB 4 20 55
80708 SBT-6MB 6 28 62
80709 SBT-8MB 8 37 71
80710 SBT-10MB 10 47 81
80711 SBT-12MB 12 55 90
80720 SB5-12MD 20 12 63 107 18
80765 SBT-16MD 16 71 113
80721 SBT-19MD 19 78 119
80722 SBT-25MD 25 90 130
80723 SBT-32MD 32 100 141
80724 SBT-12ME 25 12 60 107 22
80766 SBT-16ME 16 67 113
80725 SBT-19ME 19 74 119
80726 SBT-25ME 25 89 130
80727 SBT-32ME 32 100 141

TA/TAS-Carbide Inserted Boring Bars
Made from heat treated alloy steel and utilizing ISO standard inserts held with torx screws, the "TA/TAS" style boring bar is a must for every shop.

For added strength and rigidity, the neck portion of the shank is oval shaped. In addition to providing greater chip clearance, this design helps eliminate tool deflection, resulting in better cutting performance.

 
TA and TAS INDEXABLE INSERT BORING BARS
TOOL NO. CODE NO. C D ØA ØB E INSERT INSERT SCREW SCREW WRENCH C D CODE NO. TOOL NO.
TA-6MA-TX 91026 27 62 10 6 8 WCMT 02 01 04 5513-020-28 5680-041-02 (T6) 12 47 91100 TAS-6MA-TX
TA-8MA-TX 91027 36 70 8 TCMT 06 T1 04-UF 5513-020-28 5680-041-02 (T6) 16 50 91101 TAS-8MA-TX
TA-10MA-TX 91028 45 78 10 20 54 91102 TAS-10MA-TX
TA-6MB-TX 91029 27 63 12 6 10 WCMT 02 01 04 5513-020-28 5680-041-02 (T6) 12 47 91103 TAS-6MB-TX
TA-8MB-TX 91030 36 71 8 TCMT 06 T1 04-UF 5513-020-28 5680-041-02 (T6) 16 50 91104 TAS-8MB-TX
TA-10MB-TX 91031 45 80 10 20 54 91105 TAS-10MB-TX
TA-12MB-TX 91032 54 86 12 TCMT 11 02 04-UF 5513-020-03 5680-041-01 (T7) 24 57 91106 TAS-12MB-TX
TA-10MD-TX 91033 45 92 20 10 18 TCMT 06 T1 04-UF 5513-020-28 5680-041-02 (T6) 20 67 91107 TAS-10MD-TX
TA-12MD-TX 91034 54 100 12 TCMT 11 02 04-UF 5513-020-03 5680-041-01 (T7) 24 70 91108 TAS-12MD-TX
TA-16MD-TX 91035 72 116 16 32 76 91109 TAS-16MD-TX
TA-20MD-TX 91036 90 131 20 TCMT 16 T3 04-UF 5513-020-10 5680-016-01 (T-15) 40 82 91110 TAS-20MD-TX
TA-10ME-TX 91037 45 94 25 10 23 TCMT 06 T1 04-UF 5513-020-28 5680-041-02 (T6) 20 69 91111 TAS-10ME-TX
TA-12ME-TX 91038 54 102 12 TCMT 11 02 04-UF 5513-020-03 5680-041-01 (T7) 24 73 91112 TAS-12ME-TX
TA-16ME-TX 91039 72 118 16 32 78 91113 TAS-16ME-TX
TA-20ME-TX 91040 90 135 20 TCMT 16 T3 04-UF 5513-020-10 5680-016-01 (T15) 40 85 91114 TAS-20ME-TX
TA-25ME-TX 91041 113 155 25 50 92 91115 TAS-25ME-TX

 

 

 

 

 

 

 

 

Click Here for Carbide Insert Specifications

 

.