Che utensili e le barre per l'alesatura delle serie illustrate in questa pagina, sono destinate principalmente ad essere usate con le teste alesatrici della Criterion.
| BRAZED CARBIDE TOOL SETS | ||
|---|---|---|
 |
 |
|
| Set BTS-6MA with 10mm Shank Consisting of (1) each |
Set BTS-6MB With 12mm Shank Consisting of (1) each |
|
| SBT-3MA | SBT-3MB | |
| SBT-4MA | SBT-4MB | |
| SBT-6MA | SBT-6MB | |
| SBT-8MA | SBT-8MB | |
| SBT-10MA | SBT-10MB | |
| SBT-12MA | SBT-12MB | |
 |
 |
|
| Set BTS-5MD With 20mm Shank Consisting of (1) each |
Set BTS-5ME With 25mm Shank Consisting of (1) each |
|
| SBT-12MD | SBT-12ME | |
| SBT-16MD | SBT-16ME | |
| SBT-19MD | SBT-19ME | |
| SBT-25MD | SBT-25ME | |
| SBT-32MD | SBT-32ME | |
| INDEXABLE INSERT BAR WITH CARBIDE INSERT |
||
|---|---|---|
 |
 |
|
| *Set BBS-3MA With 10mm Shank Consisting of (1) each |
*Set BBS-4MB With 12mm Shank Consisting of (1) each |
|
| TA-6MA-TX | TA-6MB-TX | |
| TA-8MA-TX | TA-8MB-TX | |
| TA-10MA-TX | TA-10MB-TX | |
| - | TA-12MB-TX | |
 |
 |
|
| *Set BBS-4MD With 20mm Shank Consisting of (1) each |
*Set BBS-5ME With 25mm Shank Consisting of (1) each |
|
| TA-10MD-TX | TA-10ME-TX | |
| TA-12MD-TX | TA-12ME-TX | |
| TA-16MD-TX | TA-16ME-TX | |
| TA-20MD-TX | TA-20ME-TX | |
| - | TA-25ME-TX | |
*Note: For "TAS" sets, add "S" to set number (BBS-3MAS)
| INSERT | l | d | d1 | s | r |
|---|---|---|---|---|---|
| WCMT 02 01 04 | 2,71 | 3,96 | 2,3 | 1,58 | 0,4 |
| INSERT | l | d | d1 | s | r |
|---|---|---|---|---|---|
| TCMT 06 T1 04-UF | 6,8 | 3,96 | 2,2 | 1,98 | 0,4 |
| TCMT 11 02 04-UF | 11,0 | 6,35 | 2,8 | 2,38 | 0,4 |
| TCMT 16 T3 04-UF | 16,5 | 9,52 | 4,4 | 3,97 | 0,4 |
.